Description
The Mega Pro Embed CH340G / ATmega2560 board is based on the ATmega2560 microcontroller and the USB-UART adapter CH340. The board is compatible with Arduino Mega 2560. The Mega Pro Embed functionalities are identical to the Arduino Mega 2560. Even though it is an Embed board, it is solid stable as the Mega Board. It uses the original chip, and a 16 MHz high-quality quartz resonators is present on the board. The board has a Micro USB connector that allows you to connect the microcontroller to the computer. The module has onboard CH340g IC.
Arduino mega pro mini can be powered directly through the Micro USB connector, or via the corresponding contact on the board (Vin). The used voltage regulator operates in a range of 6 to 9 Volt DC. The maximum output current upon 5 Volt is around 800mA, while on the 3.3 Volt it is about 800 mA. The voltage regulator allows to use up to 12 volt as an input value, however we do not recommend exceeding the recommended values aforementioned, since this can lead to excessive heat and damage the device.
Technical Specification:
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 6-9V
- Input Voltage (limit): 12V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current for 5V Pin: 800 mA
- DC Current for 3.3V Pin: 800 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- Built-in LED: 13
- Size: 54mm*40mm*18 mm (L*W*H)
Features:
- The board is compatible with Mega 2560.
- Excellent solution for developing projects based on ATmega2560.
- The board can be powered directly through the Micro USB connector
- The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA
Applications:
- Smart Homes
- Defence
- Industries
- Traffic Signal Control
- Medical
- Laboratories
- Automatic Vehicle Control
- Aerospace