Description
The 4G LTE GSM/GPRS GNSS USB Nano Modem is an Ultra-compact LTE Modem (35.25 x 33.5mm) incorporates EC200U-CN LTE Cat 1 wireless communication module designed and developed by Quectel. This Ultra-compact LTE Modem can be used standalone with PC/Laptop over micro-USB without any hat. The EC200U series QuecOpen are wireless communication modules, which support LTE-FDD, LTE-TDD, and GSM/GPRS network data connection.
A Wide Band, 700-2700Mhz frequency range, 4G LTE antenna provides a wide enough range for a number of applications including BLE & LoRa/RF. This antenna is 52mm x 24mm with a coaxial cable ending in an IPEX (u.FL equivalent) connector. The antenna has a 3M adhesive backing making it easy to fix it to your project.
The EC200U-CN LTE 4G and GNSS Ultra-compact Modem is a powerful and versatile communication device that combines 4G LTE connectivity with GNSS (Global Navigation Satellite System) technology. The modem supports multiple LTE bands and can achieve data rates of up to 150Mbps for download and 50Mbps for upload, making it ideal for high-speed data transmission. It also features GNSS technology, allowing for accurate positioning and navigation in various environments.
The modem is ultra-compact, measuring just 35.25mm x 33.5mm, making it easy to integrate into small devices and systems. It is also easy to use, with a simple AT command interface for easy configuration and control. The EC200U-CN LTE 4G and GNSS Ultra-compact Modem is a powerful and reliable communication device, ideal for applications that require high-speed data transfer and accurate positioning. Its small size and ease of use make it an excellent choice for developers and engineers looking for a versatile and powerful communication solution.
Technical Specification:
Board Specification:
- Power Supply: 5V USB
-
Frequency Bands
- LTE-FDD B1/B3/B5/B8
- LTE-TDD B34/B38/B39/B40/B41
- GSM 900 MHz/1800 MHz
- GNSS1: GPS, GLONASS, BeiDou, Galileo, QZSS
- Supports any Nano sim.
- High-efficiency power regulation.
- Compatible with worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies & carriers.
- Delivers 10Mbps downlink and 5Mbps uplink data rates
- Can be used standalone with PC/Laptop over micro-USB
- Optional Send/Receive AT commands over Raspberry Pi UART port is available
- Taking the module into the Airplane Mode, resetting the module or RI and DTR functions can be accessible over GPIO pins.
- The power of the whole board electronics can be disabled for low-power consumption use cases
- Working temperature range: -40C ~ 80C.
Antenna Specification:
- Frequency range: 700-2700Mhz
- Gain: 8dBi internal antenna
- VSWR: <=1.8
- Input impedance: 50 Ohm
- Material: Radiator FPC
- Antenna Size: 52x24mm
- Cable type: 1.13 coaxial cable
- Connector style: IPEX (u.FL equivalent)
- Polarization: Vertical
- Power: 30w
- Mounting: 3M sticker
Features:
- Fast wireless monitoring
- High speed data transmission
- Reliable, fastwireless communication
- Compact size
- Easy to use
Board Dimensions:
Applications:
- M2M applications such as automotive, metering, tracking system, security, router, wireless POS, mobile computing device etc.
- Ideal solution for applications that require both cellular communication and GPS navigation, such as fleet management, vehicle tracking, and asset tracking
- Install USB derivers
- Connect USB to PC
- Check ports in device manager
- Send AT+QDOWNLOAD=1 command on AT port of the module
- Check ports in device manager for SPRD U2S Diag port
- Open Qflash
- Select SPRD U2S Diag port
- Select baud rate 921600
- Browse .pac file from f/w path
- Click on the start
- Wait to f/w upgrade. You will get pass massage in QFLASH
- Firmware Link - Download
Important Documents: