Description
7Semi EG800AK-CN 4G LTE Cat-1 bis Mini Industrial Modem USB-C – CM-10149
The 7Semi EG800AK-CN 4G LTE Cat-1 bis Mini Industrial Modem (CM-10149) is a compact cellular communication board designed for industrial IoT, embedded systems, remote monitoring, telemetry, and wireless automation applications. Powered by the Quectel EG800AK-CN LTE Cat-1 bis modem, it provides reliable 4G cellular connectivity for devices operating in locations where WiFi or wired networking is unavailable.
Supporting LTE download speeds up to 10Mbps and upload speeds up to 5Mbps, the modem enables efficient device-to-cloud communication, sensor data transmission, remote equipment monitoring, and IoT gateway development.
The module supports LTE-FDD bands B1, B3, B5, and B8, along with LTE-TDD bands B34, B38, B39, B40, and B41, for connectivity with compatible cellular networks in India and China.
Featuring a USB Type-C interface and UART communication with AT command control, the modem integrates with ESP32, STM32, Arduino, Raspberry Pi, RP2040, and other compatible embedded platforms. The USB-C connector supports power and modem communication for suitable host systems, while UART TX and RX pins enable direct communication with external microcontrollers.
The modem includes an onboard Nano SIM card slot, U.FL/IPEX LTE antenna connector, network status indicators, and dedicated KEY and RESET control pins for easier hardware integration and automated modem management.
With support for communication protocols including MQTT, TCP/IP, HTTP, HTTPS, and UDP, the 7Semi EG800AK-CN modem is suitable for industrial monitoring, remote telemetry, smart agriculture, cloud-connected devices, and cellular IoT applications.
Key Features
-
Quectel EG800AK-CN Modem: Integrated 4G LTE Cat-1 bis cellular modem for embedded and industrial communication.
-
4G LTE Cat-1 bis Connectivity: Provides cellular data communication for IoT devices and remote monitoring systems.
-
Up to 10Mbps Download Speed: Supports efficient reception of data through compatible LTE networks.
-
Up to 5Mbps Upload Speed: Enables sensor data transmission, telemetry, and cloud communication.
-
Multiple LTE Frequency Bands: Supports LTE-FDD B1/B3/B5/B8 and LTE-TDD B34/B38/B39/B40/B41.
-
USB Type-C Interface: Provides a convenient connection for power, development, debugging, and supported modem communication.
-
UART AT Command Control: Enables modem configuration, network registration, and data communication through microcontrollers.
-
Nano SIM Card Slot: Supports compatible cellular SIM cards without requiring an external SIM holder.
-
U.FL/IPEX Antenna Connector: Allows connection of a suitable external LTE antenna.
-
MQTT and HTTP/HTTPS Support: Suitable for cloud-connected IoT applications using supported modem firmware.
-
TCP/IP and UDP Connectivity: Enables network communication for embedded applications.
-
Dedicated KEY Control Pin: Supports hardware-based modem power-state control.
-
Hardware RESET Pin: Enables external modem reset through compatible controllers.
-
Network Status Indicators: Provides visual feedback for modem and cellular network activity.
-
Onboard Power Regulation: Simplifies integration with compatible external power supplies.
-
Industrial IoT Integration: Suitable for ESP32, STM32, Arduino, Raspberry Pi, RP2040, and other embedded controllers.
-
Compact Mountable Design: Includes mounting provisions for installation in suitable enclosures and electronic systems.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | 7Semi |
| Product Name | EG800AK-CN 4G LTE Cat-1 bis Mini Industrial Modem USB-C |
| Manufacturer Part Number | CM-10149 |
| Product Type | Industrial Cellular IoT Modem |
| Modem IC | Quectel EG800AK-CN |
| Cellular Technology | 4G LTE |
| LTE Category | Cat-1 bis |
| Maximum Download Speed | 10Mbps |
| Maximum Upload Speed | 5Mbps |
| LTE-FDD Bands | B1, B3, B5, B8 |
| LTE-TDD Bands | B34, B38, B39, B40, B41 |
| Supported Regions | India and China, Subject to Network Compatibility |
| USB Interface | USB Type-C |
| Communication Interface | UART |
| Modem Control | AT Commands |
| USB-C Power Input | 5V DC |
| External VIN Power Input | 5V–26V DC (Verify Hardware Revision) |
| SIM Card Interface | Nano SIM |
| Antenna Connector | U.FL / IPEX |
| Antenna Type | External LTE Antenna |
| Supported Protocols | MQTT, TCP/IP, HTTP, HTTPS, UDP |
| Hardware Control | KEY, RESET |
| UART Pins | TX, RX |
| Network Indicators | Onboard Status LEDs |
| Power Management | Onboard Regulation |
| Operating Temperature | −30°C to +60°C (Listed by Evelta) |
| Mounting | PCB Mounting Holes |
| Compatible Platforms | ESP32, STM32, Arduino, Raspberry Pi, RP2040 |
| Cellular Network Requirement | Compatible 4G LTE SIM and Data Plan |
Pin Configuration
| Pin | Function |
|---|---|
| VIN | External DC Power Input |
| GND | Ground |
| TX | UART Transmit |
| RX | UART Receive |
| KEY | Modem Power Control |
| RESET | Hardware Modem Reset |
Applications
-
Industrial IoT Monitoring: Connect industrial sensors, controllers, and machines to cellular networks for remote monitoring.
-
Remote Telemetry: Transmit sensor measurements and equipment status from locations without WiFi connectivity.
-
Smart Agriculture: Enable cellular communication for irrigation monitoring, soil sensors, and environmental sensing systems.
-
Industrial Automation: Develop LTE-connected monitoring and control solutions for industrial installations.
-
Cloud-Connected IoT: Communicate with compatible cloud platforms through MQTT, HTTP, HTTPS, and TCP/IP.
-
Smart Metering: Send utility and energy meter readings through supported cellular networks.
-
Asset Monitoring: Track equipment status and operational data using external sensors and optional location hardware.
-
Environmental Monitoring: Build remote weather, temperature, humidity, and air-quality monitoring systems.
-
Cellular IoT Gateways: Add LTE connectivity to compatible embedded controllers and data acquisition equipment.
-
Arduino and ESP32 Development: Experiment with 4G LTE communication using UART and AT commands.
-
Unattended Remote Systems: Implement automatic modem reset and power-state management using KEY and RESET pins.
-
Educational Projects: Explore cellular networking, embedded communication, MQTT, and IoT application development.
Package Contents
-
1 × 7Semi EG800AK-CN 4G LTE Cat-1 bis Mini Industrial Modem USB-C (CM-10149)
Compatibility Information
-
Requires a compatible Nano SIM card with an active 4G LTE data plan.
-
LTE frequency bands must match the cellular operator's supported network.
-
USB Type-C supports suitable power and modem communication connections.
-
UART integration requires compatible host logic levels.
-
External VIN must be connected only to a verified, appropriately rated power supply.
-
Cellular transmission may require higher peak current than normal idle operation.
-
MQTT, HTTP, HTTPS, and other functions depend on supported firmware and software configuration.
-
Does not include WiFi or Bluetooth as standalone connectivity options.
-
Do not assume GNSS/GPS positioning support from the EG800AK-CN modem.
Technical Documentation
For hardware connections, modem AT commands, supported LTE bands, and integration examples, refer to the 7Semi EG800AK LTE Mini Industrial Modem Technical Wiki.




